|
|
|
|
|
1970-74 Front or Rear
Bumper Bolt Set (16 pieces) |
|
|
 |
|
Price:$9.95 set |
|
|
This handy kit provides
all the stainless steel capped carriage bolts to properly mount the
bumpers. Flat washers, lock washers and nuts are included.
Part #2161-001-68S
Ships FedEx | | |
|
 |
|
|
| 1970-71
Headlamp Adjusting Screw with Nut Box of 25 |
|
|
 |
|
Price:$14.95 box |
|
|
Fresh nylon adjusting nuts with clean tabs that stay put. These new
reproduction pieces are here to get you back on the road looking clean
and new again.
Part #HWB2181
Ships FedEx | | |
 |
|
|
|
1972-74 Headlamp
Adjusting Screw with Nut (#12-28 x 1-1/2") |
|
|
 |
|
Price:$14.95
box |
|
|
Box of 25
Fresh nylon adjusting nuts with clean tabs that stay put. These new
pieces are here to get you back on the road looking clean and new again.
Part #HWB2182
Ships FedEx | | |
|
 |
|
|
|
|
|
1970 & 1972-74 Barracuda
Front Valance Panel |
|
|
 |
|
Price:$199.95 ea.
|
|
|
Excellent quality
reproduction of the stamped steel valance panel found below your front
bumper and grille. Direct bolt-on with all mount tabs. No more rust and dings. Factory type black EDP
coating.
Part #2422-025-70
Ships FedEx | | |
|
 |
|
|
|
1970 Barracuda Front
Fender |
|
|
In Tooling |
|
Price:$599.95 ea.
|
|
|
EDP coated, ready
to bolt on reproduction steel fender.... Better, cleaner and straighter
than that bondo bad boy you have on there now!
Part #2422-100-70
Ships Truck Freight Collect | | |
|
 |
|
|
|
1971 Barracuda Front
Fender (except cuda / without gill holes) |
|
|
In Tooling |
|
Price:$599.95 ea.
|
|
|
Why bother repairing the old
rotted fender when you can install this awesome after market steel
fender, EDP coated for rust resistance. Ready to bolt on and prime.
Part #2422-100-711
Ships Truck Freight Collect | | |
|
 |
|
|
| 1971
Barracuda Front Fender (cuda with gill holes) |
|
|
In Tooling |
|
Price:$599.95 ea.
|
|
|
EDP coated, ready
to bolt on reproduction steel fender.... Better, cleaner and straighter
than that bondo bad boy you have on there now!
Part #2422-100-712
Ships Truck Freight Collect | | |
 |
|
|
|
1972-74 Barracuda Front
Fender |
|
|
In Tooling |
|
Price:$599.95 ea.
|
|
|
Why bother repairing the old
rotted fender when you can install this awesome after market steel
fender, EDP coated for rust resistance. Ready to bolt on and prime.
Part #2422-100-72
Ships Truck Freight Collect | | |
|
 |
|
|
| 1970-74
Barracuda Fender to Cowl Mount Bracket |
|
|
These steel pieces are
the best way to keep the rear fender sections from flapping in the wind.
Quality reproduction steel for street application.
Part #2422-120-701
Ships FedEx | | |
 |
|
|
|
1970-74 Front Inner
Fender |
|
|
Inner fenders ravaged by
rust and rotted by dripping battery acid? Try a new die stamped steel
inner fender made from automotive grade steel.
Part #2120-350-70
Ships Truck Freight Collect | | |
|
 |
|
|
|
|
|
1970-74 Steel Cowl Induction Hood Scoop
2 1/4" |
|
|
 |
|
Price:$179.95 ea.
|
|
|
Steel Cowl Induction Scoop Measures 53-3/4" long x 24" wide x 2-1/4"
high. Now you can fabricate your own steel
cowl induction hood. This steel scoop can be easily trimmed and welded
in place to fit your needs. Unlike ABS plastic & fiberglass this scoop
will stay put.
Part #SCOOP03
Ships FedEx | | |
|
 |
|
|
|
1970-74 Steel Pro-Cowl Induction
Hood Scoop 5" |
|
|
 |
|
Price:$179.95 ea.
|
|
|
Steel Cowl Induction Scoop
Measures 55-3/8" long x 24-7/8" wide x 5" high.
Now you can fabricate your own steel cowl
induction hood. This steel scoop can be easily trimmed and welded in
place to fit your needs. Unlike ABS plastic & fiberglass this scoop will
stay put.
Part #SCOOP04
Ships FedEx | | |
|
 |
|
|
|
1970-74 Pro-Hood Pin Kit |
|
|
 |
|
Price:$34.95 ea.
|
|
|
Complete Pro-Hood Pin Kit (30 pieces, Includes bezels, plates, gaskets,
pins, cables, and all hardware to install) Originally designed as OEM style factory replacement kit.
Part #4033-222-70S
Ships FedEx | | |
 |
|
|
|
|
|
1970-74 Battery Tray |
|
|
 |
|
Price:$24.95 ea.
|
|
|
Battery Acid eating your tray? Well, then its time for a New die-stamped
battery tray with EDP coating for added rust protection.
Part #2120-300-70
Ships FedEx | | |
|
 |
|
|
| 1970-71
Battery Tray Hold-Down Retainer |
|
|
 |
|
Price:$6.95 ea.
|
|
|
Here's what you need to hold down
the battery to the new tray. You'll be lost with out it!
EDP coating for added rust protection.
Part #2112-301-701
Ships FedEx | | |
 |
|
|
|
1970-74 Battery Tray
Inner J-bolt |
|
|
 |
|
Price:$2.95 ea.
|
|
|
Tired of bent, rusted, and stripped out original hold down J bolts? New
reproduction pieces are here to get you back on the road looking clean
and new again.
Part #2110-301-602
Ships FedEx | | |
|
 |
|
|
|
1970-74 Battery Tray
Outer J-bolt |
|
|
 |
|
Price:$2.95 ea.
|
|
|
Restore your vehicle to original condition. New reproduction pieces
are here to get you back on the road looking clean and new again.
Part #2111-301-671
Ships FedEx | | |
|
 |
|
|
| 1970-74
Battery Tray Encapsulated Nut |
|
|
 |
|
Price:$1.95 ea.
|
|
|
Install your new battery
with some fresh clean threads. Made
to exacting original equipment
specifications.
Part #2112-301-702
Ships FedEx | | |
 |
|
|
|
|
|
1970-74 Cowl Lower Side
Panel |
|
|
Finally, no more cave man
floor pans...These die-stamped steel patches cover inside the car, on
the side wall and where your feet go in the front of the seat. Panels
are EDP coated for rust resistance.
Part #2120-385-703
Ships FedEx | | |
|
 |
|
|
1970-74 Floor Pan
1-piece Front Floor Pan
Also fits
71-74
Satellite-Roadrunner-Charger-Coronet w/minor mod. |
|
|
|
 |
|
Price:$499.95 ea.
|
|
|
Rusty floor? No Problem!
Manufactured from heavy gauge steel, this thick EDP coated floor pan
takes care of the cancer that has consumed your floor. Finally, no more
view of the asphalt below.
Part #2120-505-711
Ships Truck Freight Collect | | |
|
 |
|
|
| 1970-74
Barracuda Center Floor Section |
|
|
|
 |
|
Price:$99.95 ea.
|
|
|
Covers rear seat foot well.
On Sale!
Buy one and get one at 20% off when you order a pair. EDP coated heavy
gauge steel patch panels for the cancer within the body. Repairing those
holes has finally been made easy with high quality die-stamped panels. Part #2422-510-70
Ships FedEx | | |
 |
|
|
|
1970-74 1-piece Under
Rear Seat Floor Pan |
|
|
EDP coated heavy gauge steel
repair
panels for the cancer within the car. Time to repair those holes. Its easy with high quality die-stamped
panels.
Part #2120-511-721
Ships FedEx | | |
|
 |
|
|
|
|
|
1970-71 Barracuda
Factory Style Quarter Panel Hardtop |
|
|
Finally a full quarter
panel that has factory coverage, including full sail panels and door
jamb pillars. EDP coated for added rust resistance. Ready to hang.
Part #2422-601-70
Ships Truck Freight Collect | | |
|
 |
|
|
| 1972-74
Barracuda Factory Style Quarter Panel Hardtop |
|
|
Finally a full quarter
panel that has factory coverage, including full sail panels and door
jamb pillars. EDP coated for added rust resistance. Ready to hang.
Part #2422-601-72
Ships Truck Freight Collect | | |
 |
|
|
|
1970-71 Barracuda
Quarter Panel Skin |
|
|
 |
|
Price:$229.95 ea.
|
|
|
On Sale!
Buy one and get one at 20% off when you order a pair.
Measures 32" high x 65" long.
This skin extends from the bottom of the quarter to the belt line and
rolls into door jam. Does
not extend to the trunk opening. Hang the whole skin or use just what
you need, EDP coating for added rust protection.
Part #2422-600-70
Ships Truck Freight Collect | | |
|
 |
|
|
|
1972-74
Barracuda Quarter Panel Skin |
|
|
 |
|
Price:$229.95 ea.
|
|
|
On Sale!
Buy one and get one at 20% off when you order a pair.
This skin extends from the bottom of the quarter to the belt line and
rolls into door jam. Does
not extend to the trunk opening. Hang the whole skin or use just what
you need, EDP coating for added rust protection.
Measures 32" high x 65" long.
Part #2422-600-72
Ships Truck Freight Collect | | |
 |
|
|
|
1972-74 Barracuda Lower
Rear Quarter Patch Panel |
|
|
 |
|
Price:$64.95 ea.
|
|
|
On Sale!
Buy one and get one at 20% off when you order a pair.
Measures 36-1/2" high x 18" long. (modify marker hole for use on '70-71)
This panel is the most affordable way to repair the rusty area behind
your wheel well, Die formed to original shape. EDP coated and ready to
weld on. Part #2422-690-72
Ships FedEx | | |
|
 |
|
|
|
1970-74 Barracuda Outer
Wheelhouse |
|
|
 |
|
Price:$109.95 ea.
|
|
|
On Sale!
Buy one and get one at 20% off when you order a pair.
Excellent quality die-
stamped outer wheel houses that form the outer part of the rear wheel
house. Years of road debris can wreak havoc on these poor guys leaving
them rotted and rusted.
Part #2422-675-70
Ships FedEx | | |
|